The Complete Stereo Imaging And Analysis Tool

StereoTool offers ultra-precise control of input gain and individual pan for left and right channels, accurate visual feedback reflecting the signal content with; a vector scope, PPM meters for inputs/outputs, phase correlation meter permanently monitoring the signal and individual left and right polarity reversal – No dongle or registration required – 100% Freeware!

Read more ...

Phase Integrity Control

The Vector Scope instantly reveals the phase integrity of your mix, when out of phase the information on the meter is lying horizontal. With StereoTool this can be fixed with a simple click on the left or right phase polarity switch to flip and reverse one of the channels you’re back in phase again!

Dual Preset Slots and Parameter Morphing

The built in preset manager and the preset morphing slider, provides instant and intuitive control of all parameters and controls. In a second, with a simple one-click operation, everything is copied from one of the two preset slots to the other, even during playback.

The two Preset/Parameter slots, A and B, can be loaded with two full set of parameters at the same time, and except for only A/B comparing two sets of parameters, the morphing slider will allow to mix them, and to record the morph with the host automation.

StereoTool v3

FREEWARE

Download now

StereoTool v3

FREEWARE

Download now

All Features

  • Input Gain controls for adjusting the level for left and right channels before processing
  • Phase inversion of the incoming signal on left and right channels
  • Individual panning control for left and right channels
  • Vector Scope Display providing accurate visual feedback reflecting the signal stereo image content graphically.
Read more ...
  • Global Stereo Width and Pan settings providing precise management of the stereo signal.
  • PPM meters for both input and output gain
  • Phase correlation meter permanently monitor the signal.
  • Open Sound Control Support

Preset and Parameter Handling

  • Preset/Parameter slots
  • To enhance the workflow the two Preset/Parameter slots, A and B, can be loaded with two full set of parameters at the same time. Apart from saving each preset, a “Global Preset” containing both the A and B settings, and the position of the “Morphing Slider”, can be saved.
  • Parameter Morphing Slider with Automation
Read more ...
  • The Morphing Slider provides morphing between the parameter settings of slot A/B allowing for really creative and useful real-time tweaking. Enabling the Automation control button exposes the Morphing Slider to the host automation.

Compatibility

                                        

Phase Integrity Control

The Vector Scope instantly reveals the phase integrity of your mix, when out of phase the information on the meter is lying horizontal. With StereoTool this can be fixed with a simple click on the left or right phase polarity switch to flip and reverse one of the channels you’re back in phase again!

Dual Preset Slots and Parameter Morphing

The built in preset manager and the preset morphing slider, provides instant and intuitive control of all parameters and controls. In a second, with a simple one-click operation, everything is copied from one of the two preset slots to the other, even during playback.

The two Preset/Parameter slots, A and B, can be loaded with two full set of parameters at the same time, and except for only A/B comparing two sets of parameters, the morphing slider will allow to mix them, and to record the morph with the host automation.

Specifications

Stereo Tool v3, as all Flux:: plug-ins, provide

  • Up to 8 channels Input/Output.*
  • 64-bits internal floating point processing.
  • Sampling rate up to 384 kHz DXD (Pyramix & Ovation MassCore/Native)**
  • Sampling rate up to 192 kHz for native (AU/VST/AAX/AAX AudioSuite).

*Not when using Center and Stereo mode, as they are M/S modes requiring stereo operation.

** VS3 license not included in Flux:: standard license. Additional VS3 license for Pyramix & Ovation Native/MassCore 32/64 bit versions available from Merging Technologies: http://www.merging.com/sales

All major native formats are supported

Windows – 7 SP1, 8, 8,1 and 10 all in both 32 and 64 bits*.

  • VST (2.4)
  • AAX Native
  • AAX AudioSuite*
  • Waves WPAPI

Mac OS X (Intel) – 10.7.5, 10.8.5, 10.9.5, 10.10.5 and 10.11.5 in both 32 and 64 bits*.

  • VST (2.4)
  • AU
  • AAX Native
  • AAX AudioSuite*
  • Waves WPAPI

* Stereo Tool v3 AAX Native & AAX AudioSuite supports 32 bit in Pro Tools 10.3.5 and 64 bit in Pro Tools 11.

Due to AVID ProTools changing to AAX, from Version 3 (v3) RTAS for AVID ProTools is no longer supported.

Processing

Alchemist v3, as all Flux:: plug-ins, provide

  • Up to 8 channels Input/Output.
  • 64-bits internal floating point processing.
  • Sampling rate up to 384 kHz DXD (Pyramix & Ovation MassCore/Native)**
  • Sampling rate up to 192 kHz for Native (AU/VST/AAX/AAX AudioSuite).

** VS3 license not included in Flux:: standard license. Additional VS3 license for Pyramix & Ovation Native/MassCore 32/64 bit versions available from Merging Technologies: http://www.merging.com/sales

Compatibility

All major native formats are supported

Windows – 7 SP1, 8,1 and 10 all in 64 bits only.

  • VST (2.4)
  • AAX Native
  • AAX AudioSuite*
  • Waves WPAPI

Mac OS X (Intel) – 10.7.5, 10.8.5, 10.9.5, 10.10.5, 1.11.6 and 10.12.6.

  • VST (2.4)
  • AU
  • AAX Native
  • AAX AudioSuite*
  • Waves WPAPI

* Stereo Tool v3 AAX Native & AAX AudioSuite supports 32 bit in Pro Tools 10.3.5 and 64 bit in Pro Tools 11.

Due to AVID ProTools changing to AAX, from Version 3 (v3) RTAS for AVID ProTools is no longer supported.